When you click "More..." this video has a bunch of small "Key Moments" icons at the bottom, so you can jump right to a specific part of the video. Eg: At 8:04 he has "Install the Right Side Bearing" Right side is marked with "R"

 - the spindle has splines for the non drive crank He starts by removing the crank with his crank puller. Excellent.
 - It is an old Cup and Cone bottom bracket

Part Names:
  Crank Arm, Spindle
  Hook Spanner wrench to pull off lock ring
  Dust Sleeve
  Spacers
  English threaded (BSA)
  Tightening Cap (preload, pulls the crank onto the splines before pinch bolt)
  Adjustor Cap
  Pinch bolts 5 mm bolt (2 bolts on the one crank) Tools:
  36 mm HCW4
  Park BBT -9 BBT 19 BBT 59 for the narrower. (to tighten in the bearings)